If you're shooting in VR on a Quest 3 or Quest 3S, a gun stock is the single accessory that changes how you play. Two hands on a rigid frame turns floaty motion-controller aim into something that shoulders, cheek-welds and tracks like an actual rifle. Your grouping tightens the first session.
This guide covers what actually matters when choosing one, which of our three platforms suits which player, and the compatibility question we get asked more than any other.
The short version
- Quest 3 and Quest 3S use identical mounts on every Olen VR stock. One buying decision covers both headsets.
- The Asset — from $57.99. The most modular and the cheapest way in. One mount covers Quest 2, 3, 3S and Pro.
- SPINE — from $81.99. Magnetic mounting, no in-game calibration, fully metal underside. The fastest to get in and out of.
- LoPRO — from $76. A lower-profile frame for players who want less stock in the way.
- Every stock ships with mounts and a sling included, and carries a 1-year warranty.
What a gun stock actually does to your aim
Holding a controller in one hand, your point of aim is controlled entirely by small muscles in your wrist and forearm. Every tremor at the grip gets multiplied out to the target — a degree of wobble at your hand is a long way off at distance. That's why VR aim feels floaty compared to a real firearm, and why your shots drift the longer you hold on target.
A stock fixes that with three contact points instead of one: shoulder, support hand, cheek. The shoulder pocket anchors the rear of the weapon so rotation has to come from your whole upper body rather than your wrist, and your support hand gives you a second fixed point to pivot around. Large muscles moving a braced object are far steadier than small muscles moving a free one.
The cheek weld does something separate and just as useful: it puts your eye in the same place relative to the sights every single time you shoulder the weapon. Consistent sight picture means you stop re-acquiring your aim point on every shot.
The result isn't that you become a better shot instantly — it's that your bad shots get less bad, and repeat shots land where the first one did.
Quest 3 or Quest 3S — does the headset change what you should buy?
No. The two headsets differ in display, passthrough quality and memory, and none of that has any bearing on a gun stock. What matters is the controllers, and they're the same across both.
So buy for your hands and your playstyle, not your headset model. If you're choosing between the headsets themselves, the 3S is the budget option with a lower-resolution display; both take exactly the same stock and the same mount.
Do Quest 3 and Quest 3S use the same gun stock?
Yes. The Quest 3 and Quest 3S use the same controllers, so on every Olen VR stock they take the same mounts. If you own one and upgrade to the other, nothing about your stock changes.
That's worth stating plainly because it isn't true across the whole Quest line, and it isn't true of every brand. Here's how mounting actually breaks down on our platforms:
The practical upshot: on The Asset, moving anywhere inside the Quest family costs you nothing. Quest 2 to Quest 3, Quest 3 to Quest 3S, even a jump to Quest Pro — the same mount carries over. On SPINE and LoPRO you'd need the correct magnetic mount for Quest 2 or Quest Pro, but Quest 3 and 3S owners share one.
The three platforms, honestly compared
We make all three, so we have no reason to push you toward the wrong one. Here's who each is actually for.
Buy The Asset if you like to tinker — or you're starting out
The Asset is the most configurable stock we make and the cheapest entry point at $57.99. It comes in Base, SBS, STKR and SBS STKR editions, and the whole MOD Armory bolts onto it: CRIG harness, FTJ foregrip, VCTR cheek rest, side-by-side conversions.
It's also the one that never strands you. Change headsets inside the Quest line and the same mount carries over. Change to something else entirely and you buy the mounts, not a new stock.
Basic tips for each edition:
Shop The Asset VR Gun Stocks →
Buy SPINE if you want in and out fast
SPINE mounts magnetically and needs no in-game calibration. Snap the controllers in, shoulder it, play. Pull one off mid-match to reload a mag by hand or throw a grenade, and snap it back.
That matters more than it sounds if you play mixed sessions — a round of Contractors, then something that isn't a shooter, then back. A stock you can be in and out of in two seconds gets used. A stock that needs a calibration step every time gets left on the shelf.
Fully metal underside, 1.6 lbs, adjustable from 24" to 28" length of pull, eight colourways, from $81.99.
Buy LoPRO if you want less stock in the way
LoPRO is our low-profile frame, from $76, with an Extended version for players who want more length of pull. Same magnetic mounting as SPINE, less bulk around the controllers.
What changed on the Quest 3 mount
Worth being straight about, because you'll find it in our older reviews.
The previous Quest 3 mount used a screw-and-nut fastener. It held fine when assembled correctly, but it was unforgiving — get the assembly wrong and you could stress the part. Enough customers hit that for it to show up in reviews, and they were right to raise it.
The current Quest 3 mount is a different part. It's fully reinforced and uses a thumbscrew and nut instead. Two things improve at once: it's substantially more durable, and you can attach and remove it by hand without a tool.
If you're reading older reviews mentioning mount breakage, that's the design they're describing, and it isn't what ships now.
What to avoid: universal stocks
The cheapest stocks on the market advertise fitting every headset. They manage it with generic clamps and rubber straps that hold the controller approximately where it needs to be.
Approximately isn't good enough. Inside-out tracking works by the headset's cameras seeing the controller, and a clamp in the wrong place blocks exactly what the cameras need — usually right as you shoulder the stock and the controller rotates away from your face. You get tracking dropouts at the worst possible moment, and no amount of in-game sensitivity tuning fixes a controller the headset can't see.
A fitted mount for your specific controller costs a little more and removes the entire problem.
Which games make a stock worth it
A stock earns its money fastest in games built around deliberate, aimed shooting. If you haven't played these, the creators below cover them better than a paragraph from us can.
Pavlov
The benchmark for VR gunplay, and the most competitive shooter on the platform. Watch a championship final and count how many players are shooting freehand.
Pavlov VR Championship Finals — MVP Perspective by Chillst3p VR
Ghosts of Tabor
An extraction shooter where a missed first shot is a lost raid, and a lost raid is lost gear. Aim consistency has a direct cost here that it doesn't have in a respawn shooter.
The ULTIMATE Beginners Guide to Ghosts of Tabor by TimelessVR
Contractors Showdown
VR battle royale, long engagement distances, and everyone good is already using a stock.
The Best VR Battle Royale Yet — Contractors Showdown by TimelessVR
Onward
Slow, milsim-paced, one-shot-kill. The game where a stock does the most work of any title on this list.
The Resurrection of VR's Most Hardcore Shooter — Onward by habie147
Breachers
Tight CQB angles and quick shoulder-and-fire. Worth watching a coaching video for this one — a lot of what players blame on aim is actually positioning.
Why You Are BAD And How To Fix It — Breachers VR by BE4M-
A stock matters less in wave shooters and arcade titles, where you're spraying at close range and speed beats precision.
Quest 3 gun stock FAQ
Do Quest 3 and Quest 3S gun stocks differ?
No. The Quest 3 and Quest 3S use the same controllers, so they take the same mounts on every Olen VR gun stock. One purchase covers both headsets.
What's the best VR gun stock for Quest 3?
For most players, The Asset at $57.99 — it's the cheapest entry point, the most modular, and its mount covers Quest 2, 3, 3S and Pro. Choose SPINE at $81.99 instead if you want magnetic mounting with no in-game calibration and the fastest attach and release.
Will my Quest 2 gun stock work with a Quest 3?
On The Asset, yes — the same mount covers Quest 2, Quest 3, Quest 3S and Quest Pro, so nothing needs replacing. On SPINE and LoPRO you'll need the Quest 3 magnetic mount, which also fits Quest 3S.
Do I need to calibrate a gun stock in-game?
Not with SPINE or LoPRO — both mount magnetically with no calibration step. The Asset seats the controllers into fitted mounts, which most games handle with their standard stock or two-handed weapon setting.
Does a VR gun stock actually improve aim?
Yes, for aimed shooting. Bracing a controller against your shoulder removes most of the small-muscle wobble that makes motion-controller aim drift, and it gives you a repeatable cheek position so your sight picture is the same every time you shoulder the weapon.
What comes in the box?
The stock, the mounts for your chosen headset, and a sling. Everything you need to play, with no bundle upcharge. All Olen VR gun stocks carry a 1-year warranty, and U.S. orders over $100 ship free.
Can I use a gun stock with Quest 3 hand tracking?
No — a stock holds the controllers, so you're using controller tracking by definition. That's what you want for shooters anyway; hand tracking isn't precise enough for aimed fire.
Last updated 16 September 2026. Prices and compatibility current as of this date. Linked gameplay videos are by their respective creators and are not affiliated with Olen VR.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.